“Cutting oil” is known in the engineering industry as the heart of working with machines. It is responsible for creating good conditions for the working process of the engine, making a stable viscosity and temperature, And preventing friction during cutting, lengthy, and mashed metal materials.
What’s the Difficulty of cutting metal materials?
Compare the difference in metallic materials from the hardest to the weakest. Cast iron and copper-based alloys are the easiest to cut. Compared to stainless steel and aluminum alloys, which are strong and difficult to cut. We should choose the right cutting oil for each type of metal. If you’re not sure about this. Seek advice from a technical expert.
How to choose the Cutting Oil to suit the materials.
It’s a little complicated to know what exactly is a cutting oil that is suitable for the metal materials to be cut. It depends on many factors.
Iron-dry cutting is often preferred to wet cutting. If you use cutting oil. The oil should be dissolved with 1 of 20 to 30 of water.
Stainless steel – For typical turning and milling work. You should use an oil that can melt. Dissolve the oil with 1 to 5 water. Especially for difficult work such as threading, grooving, and reaming. And you should also consider a mineral oil containing sulfur.
Copper-based alloys – Most brass and copper alloys are easier to corrode. You should therefore not use an oil that contains chlorosulfate. And should use a dissolved oil with 1 of 20 to 25 water. For the work that is difficult to cut. You can use 1 in 10 to 20.
Nickel and copper alloys – How to corrode this type of metal. You should not use oil containing sulfur. It can help prolong the life of the inserts and not corrode the material. However, mineral oil with sulfur in it works so well with broken scrap turning. (If you’re not sure. You can seek advice from a cutting professional)
Aluminum alloys – Aluminium and aluminum alloys are often machined dry. But if you want to use cutting oil. You should dissolve the oil with 1 of 20 to 30 water.
Cast iron – Cast iron is also often machined dry. You should use a synthetic cutting oil that can be dissolved in water. Dissolve it with 1 to 20 to 40 water.
If you require further advice or information, please contact:
Facebook Fanpage: Apollo (Thailand)
Line official: @apollothailand
Yes, you can only change 2 tires on the front wheels. But, you must have a record of when each pair of tires started to change. So, next time you can get the right information to change the front tires at the best and right time without taking any risk.
In case you were wondering. Our answer is yes, you can use any normal engine oil for your automatic motorcycle.
Transmission oil ensures the smooth functioning of the transmission system And effectively reduces internal friction.
How does the white and black smoke occur from the vehicle?
A rainy day is not a safe day to drive. It can cause problems with soaking the road and the treads of the wheels.
Viscosity is a thickness-thinness level meter of engine oil. Has a variety of lubricating values at different temperatures.
AMATA City Chonburi Industrial Estate, Phase 6, 700/623 Moo 4, Tambon Ban Kao, Amphoe Phan Thong, Chonburi 20160
